Power Amplifier

Approx. Rs 70,000 / PieceGet Latest Price

Product BrochureProduct Details:

• 3300 + 3300w RMS @ 2 OHMS 
• 2450 + 2450W RMS @ 4 OHMS
• 1850 + 1850W RMS @ 8  OHMS
• STABLE @ 2 OHMS 

Approx. Rs 60,000 / PieceGet Latest Price

Product BrochureProduct Details:

Details:

• Behringer NX6000D Ultra-Lightweight 6000-Watt Class-D Power Amplifier with DSP Control and SmartSense Loudspeaker Impedance Compensation

Approx. Rs 85,000 / PieceGet Latest Price

Product BrochureProduct Details:

QSC''''''''s RMX 5050 power amplifier represents the state-of-the-art in professional quality performance at an affordable price. Perfectly suited for a wide range of sound reinforcement applications including professional touring, performing musicians, and mobile entertainers, the RMX 5050 is optimized to deliver high levels of sustained power, extraordinary audio performance and road-proven reliability.

Like its smaller sibling (the RMX 4050HD), the RMX 5050 features a three-tier, Class H design. The RMX 5050 is extremely efficient at real world power levels. Less AC current is wasted and more goes into producing useful audio power. The RMX 5050 uses the best available component upgrades to increase peak power by 25% over the RMX 4050HD.

Like all RMX amps, the RMX 5050 features balanced 1/4" TRS, XLR and barrier strip inputs, binding posts and Neutrik Speakon® outputs, front-mounted gain controls, plus signal and clip LED indicators to monitor performance.

Amplifier Selector Tool
Need help choosing the right RMX Series amplifier for your speakers? Select your loudspeakers from over 200 of the most popular models to find out which amplifier will provide optimal performance.

Features:

• The new flagship of the RMX line, the RMX 5050 provides extremely high power and represents tremendous value
• The RMX 5050 provides advanced thermal performance, delivering higher continuous power in 2-ohms stereo or 4-ohms bridged applications
• Dual mono, high current power supply for increased reliability and performance
• 3RU chassis only 16" deep
• Professional quality performance - incorporates road-proven QSC designs
• High-current toroidal transformers for greater two-ohm power and low noise
• Independent user-defeatable clip limiters reduce distortion
• Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
• Balanced 1/4" (6.3 mm) TRS, XLR, and barrier strip inputs for maximum flexibility
• Binding post and Neutrik Speakon outputs
• Front mounted gain controls for easy access
• Signal and Clip LED indicators to monitor performance

Approx. Rs 45,000 / PieceGet Latest Price

Product BrochureProduct Details:

Dynatech V Series Audio Power Amplifiers deliver from 500 Watts to 6800 Watts of power in two to three rack spaces. High current transistors combined with low noise input amplifiers enable the V series to deliver exceptional power. Built around robust and advanced toroidal transformers, they deliver clean power on demand. The advanced protection circuitry guards against short circuit and open circuit, and also protects against ultrasonic and RF interference. A high current power supply increases reliability and performance. Other features include center-dented gain controls, input peak limiter, and fast recovery to ensure low distortion. The variable speed Fans effectively cool the amp and protect against overheating. Input is through XLR connectors for output. The V Series Audio Power Amplifiers have sub woofer outputs with a selectable low pass filter at variable frequency upto 200Hz. Dynatech V Series Power Amplifiers are specially designed for professionals who value high power, audio clarity, reliability and lasting performance.

Approx. Rs 75,000 / PieceGet Latest Price

Product Details:

• *3600W + 3600W RMS @ 4 Ω*
• Description: Damping over 1000 *D Class, S/N Ratio : 103dB Live Sound Power Amplifier

Approx. Rs 55,000 / PieceGet Latest Price

Product Details:

Features:

• 2500 + 2500 RMS @ 2 Ohms - MT Series amps offer a stupendous 99% reliability and the internal hardware is strong to handle the vagaries of transportation.
• It has heart throbbing bass when coupled with NX audio 18 bass drivers and has one of the highest quality to value for money ratio.
• MT1201 transistor PCBs use highly stable ONSEM 28 nos NJW0302 & 28 nos NJW0281 output transistors to give outstanding power, Carling switch circuit breaker is used which ensures very good DC inrush protection.
• The lowest power consumption is less than 0.1A when working without load.
• MT series aims at mid end market segment and professional fixed installation market with people who have tight budgets and need stable and high quality amplifier it is great for large performances, discotheques , nightclubs, stadiums, cinemas and rental and live performances Patents On MT Series.

Approx. Rs 30,500 / PieceGet Latest Price

Product Details:

Features:

• Specialized system protection circuit with Super Short Circuit Overload, DC, Soft Start, Thermal Protection
• Two individual cooling fans, Class AB Circuit , Zero Noise
• Hi-Pass, Low-Pass & Bypass Crossover, 160Hz Hi & Low Pass filters
• Input Sensitivity Selector & limiter, Bridge, Stereo & Parallel connections

Approx. Rs 65,000 / PieceGet Latest Price

Product Details:

MT Series are the highest selling series of Amplifiers in its class in India, they offer a stupendous 99% reliability and the internal hardware is strong to handle the vagaries of transportation, it has heart throbbing bass when coupled with NX audio 18 bass drivers and has one of the highest quality to value for money ratio. MT1201 transistor PCBs use highly stable ONSEM 28 nos NJW0302 & 28 nos NJW0281 output transistors to give outstanding power, Carling switch circuit breaker is used which ensures very good DC inrush protection. The lowest power consumption is less than 0.1A when working without load.

MT series aims at mid end market segment and professional fixed installation market with people who have tight budgets and need stable and high quality amplifier it is great for large performances, discotheques , nightclubs, stadiums, cinemas and rental and live performances Patents On MT Series.

Approx. Rs 45,000 / PieceGet Latest Price

Product Details:

Features:

• 2 x 2,000 Watts into 2 Ohms, 2 x 1,400 Watts into 4 Ohms, 4,000 Watts into 4 Ohms (bridge mode)
• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• Switchable limiters offer maximum output level with reliable overload protection
• Detented gain controls for precise setting and matching of sensitivity
• Precise Power, Signal and Clip LEDs to monitor performance

Approx. Rs 47,000 / PieceGet Latest Price

Product Details:

Features:

• 1600 + 1600W RMS @ 2 Ohms - MT Series amps offer a stupendous 99% reliability and the internal hardware is strong to handle the vagaries of transportation.
• It has heart throbbing bass when coupled with NX audio 18 bass drivers and has one of the highest quality to ratio.
• MT1201 transistor PCBs use highly stable ONSEM 28 nos NJW0302 & 28 nos NJW0281 output transistors to give outstanding power, Carling switch circuit breaker is used which ensures very good DC inrush protection.
• The lowest power consumption is less than 0.1A when working without load.
• MT series aims at mid end market segment and professional fixed installation market with people who have tight budgets and need stable and high quality amplifier it is great for large performances, discotheques , nightclubs, stadiums, cinemas and rental and live performances Patents On MT Series.

Approx. Rs 45,000 / PieceGet Latest Price

Product Details:

Features:

• Provided with fan to keep the amplifier cool enabling trouble free operations under extreme climate conditions
• Active Bass & Treble Control
• Master Control to control overall sound

Approx. Rs 1.1 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

• Output Power Per Channel: 100Hz, 0.1% THD both channels driven : 8 Ω 2450 OR 4 Ω 4000 OR 2 Ω 3200
• Input Sensitivity : 1.4v
• Input Impedance : 10k Ω
• Slew Rate : 20v/uS
• Distortion, SMPTE : 0.1%
• Frequency response at 1 watt : 20Hz – 1kHz
• Damping Factor (8 Ω) : 1000
• Signal to Noise Ratio (SNR) 100dB
• Crosstalk 85dB
• Output Circuit Type Class-D (Pulse Width Modulation)
• Controls Front Level Control
• Connectors (Input) Neutrik XLR Male & Female (Balanced)
• Connectors (Output) 4x Neutrik Speakon (8Ω/Speakon)
• LED Indicators Power, Signal Bar Graph, Clip / Limit / Protect
• Cooling 1 x Variable Speed Fan, Front to Back Airflow
• Amplifier Protection DC Offset, Short Circuit, Auto-Ramp, Soft Start,
• Thermal, Bus Pumping, Over Current and Clip Monitoring
• Speaker Protection CCut-Off Relays on Speaker Outputs, AC Mains Fault Fuse,
• Post Capacitance Rail Fuses, DC Detect./
• Power Requirements (Nominal Voltage) 240v AC, 50Hz
• Operating Voltage Range 170v AC to 255v AC
• AC Connection 1.5 M Mains Cord with Heavy Duty 16A Three-Pin Plugg
• Weight 38.5kg
• 19 inch Rack Units 3U
• Dimensions (mm) HxWxD 133mm x 483mm x 379mm (5.25in x 19in x 13.78in)
• NOTE: Specifications are subject to upgradation & change without notice.

Approx. Rs 40,000 / PieceGet Latest Price

Product Details:

power amplifer 
2 channel 

Approx. Rs 60,000 / PieceGet Latest Price

Product BrochureProduct Details:

•  4 x 1600 watts into 2 ohms, 2 x 3000 watts into 4 ohms and weighs less than 13.4 lbs / 6.1 kg
• Ultimate reliability through revolutionary cool-running high-density class-d technology with "near-zero" thermal buildup
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
• Built-in stereo crossover with low-cut, high-cut and full range mode
• Smartsense loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance

Approx. Rs 75,000 / PieceGet Latest Price

Product BrochureProduct Details:

QSC's RMX 4050 Power Amplifier represents the state-of-the-art in professional quality performance at an affordable price. Perfectly suited for a wide range of sound reinforcement applications including professional touring, performing musicians, and mobile DJs, the RMX 4050HD is optimized to deliver high levels of sustained power, extraordinary audio performance, and road-proven reliability.

Like its smaller sibling (the RMX 1850HD), the RMX 4050HD is one of two RMX "Heavy Duty" models designed to work as hard into 2-ohm loads as most competing amplifiers will at 4 ohms. With a three-tier, Class H design, the RMX 4050HD is extremely efficient at real world power levels. Less AC current is wasted and more goes into producing useful audio power. The 120-volt versions of the RMX 4050HD accomplish all this with a standard 15 amp plug.

Approx. Rs 20,000 / PIECEGet Latest Price

Product BrochureProduct Details:

• 700 Watts RMS Output at 2 / 4 Ohms.70 & 100 Volts.
• 70 / 100 Volts.
• Output Level LED.
• 3 Way Tone Control.
• Horn / Speaker Switch.
• Force Cooling.
• Input Line 1V / 10K Ohms & Mic. 0.8 mv.
• Protection: AC Bi-Metal Circuit Breaker, Short Circuit & Over Temperature with Visual LED Indication.
• Power Supply: AC 220v 50 Hz.
• Dimension: 483 (W) x 460 (D) x 155 (H) mm.
• Weight: 25.600 kg. (approx.)

Approx. Rs 68,000 / PieceGet Latest Price

Product Details:

This amplifier is a representation of Dynatech’s continuing commitment to produce the best and highest quality audio products at an affordable price. These amplifiers are designed to provide a big impact in sound reproduction.

The DynaTech V PLUS Series is based on the same advanced circuit topologies that have made DynaTech amplifiers the choice of touring professionals worldwide. V PLUS Series amplifiers are designed for high operating efficiency and accurate sonic performance across the full audio bandwidth, even under stressful conditions. Internal components are the finest available, and key sub-assemblies are pre-tested before final assembly. Finally, each amplifier is "burned in" and thoroughly tested (using precision audio test equipment) before shipping. In addition, all V PLUS Series amplifiers incorporate DynaTech’s exclusive Tour Class protection features to safeguard both internal circuitry and connected loudspeakers. This proven combination of advanced design, quality construction, and comprehensive circuit protection is your guarantee of fail-safe reliability. You can depend on consistent, stable performance even when your V PLUS Series amplifier is subjected to punishing extremes in the most demanding fixed or mobile sound reinforcement applications.

Approx. Rs 65,000 / PieceGet Latest Price

Product Details:

Dynatech V Series Audio Power Amplifiers deliver from 500 Watts to 6800 Watts of power in two to three rack spaces. High current transistors combined with low noise input amplifiers enable the V series to deliver exceptional power. Built around robust and advanced toroidal transformers, they deliver clean power on demand. The advanced protection circuitry guards against short circuit and open circuit, and also protects against ultrasonic and RF interference. A high current power supply increases reliability and performance. Other features include center-dented gain controls, input peak limiter, and fast recovery to ensure low distortion. The variable speed Fans effectively cool the amp and protect against overheating. Input is through XLR connectors for output. The V Series Audio Power Amplifiers have sub woofer outputs with a selectable low pass filter at variable frequency upto 200Hz. Dynatech V Series Power Amplifiers are specially designed for professionals who value high power, audio clarity, reliability and lasting performance.

Approx. Rs 58,000 / PieceGet Latest Price

Product Details:

Dynatech V Series Audio Power Amplifiers deliver from 500 Watts to 6800 Watts of power in two to three rack spaces. High current transistors combined with low noise input amplifiers enable the V series to deliver exceptional power. Built around robust and advanced toroidal transformers, they deliver clean power on demand. The advanced protection circuitry guards against short circuit and open circuit, and also protects against ultrasonic and RF interference. A high current power supply increases reliability and performance. Other features include center-dented gain controls, input peak limiter, and fast recovery to ensure low distortion. The variable speed Fans effectively cool the amp and protect against overheating. Input is through XLR connectors for output. The V Series Audio Power Amplifiers have sub woofer outputs with a selectable low pass filter at variable frequency upto 200Hz. Dynatech V Series Power Amplifiers are specially designed for professionals who value high power, audio clarity, reliability and lasting performance.

Approx. Rs 80,000 / PieceGet Latest Price

Product BrochureProduct Details:

There's no debate when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.
 
 

Approx. Rs 60,000 / PieceGet Latest Price

Product Details:

power amplifier 2 channel 

Approx. Rs 42,000 / PieceGet Latest Price

Product Details:

sound standard ca 12 power amplifer  for dj programme 

Approx. Rs 1.1 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

There's no debate when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.