Panchi Sound
Send Email
0804895789179% Response Rate
Search

Home » Our Products » Audio Speaker


Audio Speaker

Our range of products include p audio 15bm-400bv3 speaker, 15bm-500b p audio speaker, c18-800el p audio speaker, c18-1000v2 p audio speaker, sd18-1700el p audio speaker and 15 bm-350 p audio speaker.

P Audio 15BM-400BV3 Speaker

REQUEST CALLBACK

P Audio 15BM-400BV3 Speaker
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 7,000 / PieceGet Latest Price

Product Details:
Usage/ApplicationDJ System
BrandP Audio
Model Number15BM-400B
ColorBlack
Sensitivity97 dB
Size/Dimension415 x 415 x 220 mm
Nominal Diameter381 mm/15 inch
Power Rating400 W(AES)
Nominal Impedance8 Ohm
Frequency Range40-3000 Hz
Chassis TypeCast Aluminum
Magnet TypeFerrite
Magnet Weight81.4 oz
Voice Coil Diameter76.2 mm/3 inch
Coil MaterialSV-W
Former MaterialKSV
Cone MaterialPaper
Surround MaterialCloth
X-max4.25 mm
Gap Depth10 mm
Net Weight8.1 kg / 17.9 lb
Shipping Weight9.5 kg / 21 lb

P Audio 15BM-400BV3 Speaker is a highly upgraded design that features many of P.Audio’s new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer has a rated bandwidth of 40Hz to 3000Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The P Audio 15BM-400BV3 Speaker has been optimized for use in two way or three way sound reinforcement systems.


The P Audio 15BM-400BV3 Speaker employs a medium format 3 inch (76.2mm) diameter voice coil that provides an AES rated 400 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available. The P Audio 15BM-400BV3 Speaker utilizes P.Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

 

The voice coil design is a bobbin wound geometry with P.Audio’s circular wire technology in an inside/outside geometry to insure very high conversion efficiency. The P.Audio circular wire technology and inside/outside winding configuration provides a very large cross-sectional area that substantially improves system cooling and reduces power compression.

 

The system suspension has been designed specifically for high linear displacement and extended low frequency response. The 15BM-500B also features a single spider configuration that provides system reliability and mechanical control.

 

The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

Yes! I am Interested

15BM-500B P Audio Speaker

REQUEST CALLBACK

15BM-500B P Audio Speaker
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,500 / PieceGet Latest Price

Product Details:
Usage/ApplicationDJ System
BrandP Audio
Power500 W (AES)
ColorBlack
Model Name/Number15BM-500B
Sensitivity97 dB
Nominal Diameter381 mm/15 in
Nominal Impedance8 Ohm
Frequency Range45-3500 Hz
Chassis TypeCast Aluminum
Magnet TypeFerrite
Magnet Weight2.9 kg/103.9 oz
Voice Coil Diameter82.5 mm/3.25 in
Coil MaterialCCA-W
Former MaterialGlass fiber
Cone MaterialPaper
Surround MaterialCloth
SuspensionSingle
X-max4.8 mm/0.19 in
Gap Depth10.0 mm/0.39 in
Voice Coil Winding Width19.6 mm/0.77 in
Packing Dimension430 x 430 x 220 mm
Net Weight10.2 kg/22.5 lb
Shipping Weight11.3 kg/24.9 lb

15BM-500B P Audio Speaker is a high output wide bandwidth transducer. The 15BM-500B is a highly upgraded design that features many of P.Audio’s new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer has a rated bandwidth of 45Hz to 3500Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The 15BM-500B has been optimized for use in two way or three way sound reinforcement systems.

The 15BM-500B employs a medium format 3.25 inch (82.5mm) diameter voice coil that provides an AES rated 500 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available. The 15BM-500B utilizes P.Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

The voice coil design is a bobbin wound geometry with P.Audio’s circular wire technology in an inside/outside geometry to insure very high conversion efficiency. The P.Audio circular wire technology and inside/outside winding configuration provides a very large cross-sectional area that substantially improves system cooling and reduces power compression.

The system suspension has been designed specifically for high linear displacement and extended low frequency response. The 15BM-500B also features a single spider configuration that provides system reliability and mechanical control.

The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

Features:
  • 3.25” Voice Coil
  • 2000 Watts Peak Power Handling
  • Ferrite Magnetics
  • Precision Circular Inside/Outside Wire Geometry
  • Die Cast Aluminum Chassis

  Re   5.5Ω
  Fs   41 Hz
  Mms   90 g/3.17 oz
  Mmd   74.95 g/2.64 oz
  Qms   4.21
  Qes   0.41
  Qts   0.37
  Vas   183.44 lt/6.48 ft3
  SD   881 cm2
  BI   17.76 Tm
  Cms   1.7e-04 m/N
  Rms   5.51 Ns/m
  Le (at 1kHz)   0.43 mH
Yes! I am Interested

C18-800EL P Audio Speaker

REQUEST CALLBACK

C18-800EL P Audio Speaker
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 16,500 / PieceGet Latest Price

Product Details:
Usage/ApplicationDJ System
BrandP Audio
Power1300 W
ColorBlack
Model Name/NumberC18-800EL
Sensitivity98 dB
Nominal Diameter457 mm/18 in
Nominal Impedance8 Ohm
Frequency Range30-200 Hz
Chassis TypeAluminum
Magnet TypeFerrite
Magnet Weight125.7 oz
Voice Coil Diameter99.3 mm/4 in
Coil MaterialSV-R
Former MaterialGSV
Cone MaterialPaper
Surround MaterialCloth
X-max5.25 mm
Gap Depth15 mm
Packing Dimension505 x 505 x 270 mm
Net Weight14.2 kg
Shipping Weight16 kg

C18-800EL P Audio Speaker is a high output low frequency transducer. The C18-800EL is an upgraded design that features many of P.Audio's new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.


The C18-800EL employs a large 4 inch (99.3mm) diameter voice coil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The transducer is optimized for use in properly tuned vented enclosures and will provide maximal reliability when both a vented enclosure and active high pass filtering are employed. The C18-800EL utilizes P.Audio's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.


The voice coil design is a bobbin wound geometry with P.Audio's rectangular wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling.


The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design further enhances system mechanical control and reliability. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance.


The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.


Features:
  • 5200 Watts Peak Power Handling
  • Active Balanced Cooling
  • Precision Rectangular Copper Wire
  • Single Spider Suspension
  • Integrated Demodulation Rings
  • High Excursion Half Roll Rubber Surround
  Re   5.7Ω
  Fs   43 Hz
  Mms   183.90 g
  Mmd   159.25 g
  Qms   12.28
  Qes    0.40
  Qts    0.39
  Vas   155.84 lt.
  SD   1255 cm2
  BI    26.46 Tm
  Cms   7.4 e-05 m/N
  Rms   4.07 Ns/m
  Le (at 1kHz)   1.27 mH
Yes! I am Interested

C18-1000v2 P Audio Speaker

REQUEST CALLBACK

C18-1000v2 P Audio Speaker
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:
Usage/ApplicationDJ System
BrandP Audio
Power1500 W(AES)
ColorBlack
Model Name/NumberC18-1000v2
Sensitivity97 dB
Nominal Diameter457 mm/18 in
Nominal Impedance8 Ohm
Frequency Range30-200 Hz
Chassis TypeAluminum
Magnet TypeFerrite
Magnet Weight1118.8 oz
Voice Coil Diameter114.4 mm/4.5 in
Coil MaterialCopper Wire (I/O)
Former MaterialGlass Fiber
Cone MaterialPaper
Surround MaterialCloth
X-max5 mm
Gap Depth15 mm
Packing Dimension505 x 505 x 275 mm
Net Weight14.2 kg
Shipping Weight16 kg

P audio C18-1000V2 is a high output low frequency. transducer. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies. and is ideal for high level deep bass and sub-woofer response in both live sound
Yes! I am Interested

SD18-1700EL P Audio Speaker

REQUEST CALLBACK

SD18-1700EL P Audio Speaker
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 17,500 / PieceGet Latest Price

Product Details:
Usage/ApplicationDJ System
BrandP Audio
Power1700 W
ColorBlack
Model Name/NumberSD18-1700EL
Sensitivity96 dB
Size/Dimension505 x 505 x 275 mm
Nominal Diameter457 mm/18 Inch
Nominal Impedance8 Ohm
Frequency Range30-200 Hz
Chassic TypeCast Aluminum
Magnet TypeFerrite
Magnet Weight3.17 Kg/111.8 Oz
Voice Coil Diameter114.4 mm/4.5 In
Coil MaterialSV-SQ
Former MaterialGlass Fiber
Cone MaterialPaper
Surround MaterialCloth
SuspensionDouble
X-max7.5 mm/0.29 Inch
Gap Depth15 Mm/0.59 Inch
Voice Coil Winding Width30 mm/1.18 Inch
Net Weight14.2 Kg/31.3 Lb

The SD18-1700EL is an very high output low frequency transducer. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating range is 30Hz to 200Hz. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio.

 

The SD18-1700EL employs a large 4.5 inch (114.4mm) diameter voice coil that provides an AES rated 1700 watts of continuous power handling and a full 6800 watts of peak rated power handling when sufficient amplifier headroom is available. It is recommended that the transducer be loaded into a properly designed vented enclosure and suitable active high pass filtering be employed if extremely high power levels are expected at low frequencies. The SD18-1700EL utilizes P.Audio's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

 

The voice coil design is an inside/outside geometry with P.Audios square wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling.

 

System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design insures very high displacement and linear response while maintaining excellent control. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance.

 

The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

 

Features:

  • 4.5" Very Large Format Voice Coil
  • 6800 Watts Peak Power Handling
  • Active Balanced Cooling
  • Ferrite Magnetics
  • Square wire Inside/Outside Coil Design
  • Double Spider Suspension
  • Integrated Demodulation Rings
  • Die Cast Aluminum Chassis

Specification:
  Re   5.2Ω
  Fs   44 Hz
  Mms   302 g/10.65 oz
  Mmd   277.35 g/9.78 oz
  Qms   10.62
  Qes   0.39
  Qts   0.38
  Vas   88.58 lt/3.13 ft3
  SD   1225 cm2
  BI   33.7 Tm
  Cms   4.2e-05 m/N
  Rms   7.86 Ns/m
  Le (at 1kHz)   1.13 mH

 

Yes! I am Interested

15 BM-350 P Audio Speaker

REQUEST CALLBACK

15 BM-350 P Audio Speaker
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 6,800 / PieceGet Latest Price

Product Details:
Usage/ApplicationDJ System
BrandP Audio
ColorBlack
Sensitivity97 dB
Size/Dimension415 x 415 x 220 mm
Nominal Diameter381 mm/15 in
Power Rating350 W (AES)
Nominal Impedance8 Ohm
Frequency40-3000 Hz
Chassis TypeCast Aluminum
Magnet TypeFerrite
Magnet Weight81.4 oz
Voice Coil Diameter76.2 mm/3 in
Coil MaterialSV-W
Cone MaterialPaper
Surround MaterialCloth
X-Max4.25 mm
Gap Depth10 mm
Net Weight8.1 kg / 17.9 lb
Shipping Weight9.5 kg / 21 lb

15 BM-350 P Audio Speaker is a high output wide bandwidth transducer. The 15BM-300B(II) NEW is an upgraded design that features many of P.Audio’s new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer has a rated bandwidth of 40Hz to 3000Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The 15BM-300B(II) NEW has been optimized for use in two way or three way sound reinforcement systems.

The 15BM-300B(II) NEW employs a medium format 3 inch (76.2mm) diameter voice coil that provides an AES rated 300 watts of continuous power handling and a full 350 watts of peak rated power handling when sufficient amplifier headroom is available. The 15BM-300B(II) NEW utilizes P.Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

The voice coil design is a bobbin wound geometry with P.Audio’s precision circular wire technology to insure high conversion efficiency.

The system suspension has been designed specifically for high linear displacement and extended low frequency response. The 15BM-300B(II) NEW also features a single spider configuration that provides system reliability and mechanical control.

The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

  Re   5.6Ω
  Fs   43 Hz
  Mms   81.77 g
  Mmd   67.38 g
  Qms   8.59
  Qes   0.35
  Qts   0.34
  Vas   169.5 lt
  SD   855.3 cm2
  BI   18.74 Tm
  Cms   1.7e-04 m/N
  Rms   2.60 Ns/m
  Le (at 1kHz)   0.68 mH
 
Yes! I am Interested

C18-650EL P Audio Speaker

REQUEST CALLBACK

C18-650EL P Audio Speaker
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 15,500 / PieceGet Latest Price

Product Details:
Usage/ApplicationDJ System
BrandP Audio
Power1200 W (AES)
ColorBlack
Model Name/NumberC18-650EL
Sensitivity97 dB
Nominal Diameter457 mm/18 in
Nominal Impedance8 Ohm
Frequency Range30-200 Hz
Chassis TypeCast Aluminum
Magnet TypeFerrite
Magnet Weight3.56 kg/125.7 oz
Voice Coil Diameter99.3 mm/4 in
Coil MaterialCCA-R
Former MaterialGlass Fiber
Cone MaterialPaper
Surround MaterialCloth
SuspensionDouble
X-max5.25 mm/0.21 in
Gap Depth15 mm/0.59 in
Voice Coil Winding Width25.5 mm/1 in
Packing Dimension505 x 505 x 275 mm
Net Weight13.3 kg/29.3 lb
Shipping Weight14.7 kg/32.4 lb

C18-650EL P Audio Speaker is a high output low frequency transducer. The C18-650ELv3 is an upgraded design that features many of P.Audios new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.


The C18-650ELv3 employs a large 3.9 inch (99.3mm) diameter voice coil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The transducer is optimized for use in properly tuned vented enclosures and will provide maximal reliability when both a vented enclosure and active high pass filtering are employed. The C18-650ELv3 utilizes P.Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.


The voice coil design is a bobbin wound geometry with P.Audios rectangular wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling.


The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design further enhances system mechanical control and reliability. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance.


The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.


Features:
  • 3.9" Large Format Voice Coil
  • 4800 Watts Peak Power Handling
  • Active Balanced Cooling
  • Ferrite Magnetics
  • Precision Rectangular Ribbon Wire
  • Double Spider Suspension
  • Integrated Demodulation Rings
  • Die Cast Aluminum Chassis
  Re   5.8Ω
  Fs   46 Hz
  Mms   179.84 g/6.34 oz
  Mmd   155.18 g/5.47 oz
  Qms   5.39
  Qes   0.58
  Qts    0.52
  Vas   144.23 lt/5.09 ft3
  SD   1225 cm2
  BI    22.76 Tm
  Cms   6.9e-05 m/N
  Rms   9.57 Ns/m
  Le (at 1kHz)   0.63 mH
Yes! I am Interested

P180/2242 P Audio Speaker

REQUEST CALLBACK

P180/2242 P Audio Speaker
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 15,500 / PieceGet Latest Price

Product Details:
Usage/ApplicationDJ System
BrandP Audio
Power1000 W (AES)
ColorBlack
Model Name/NumberP180/2242
Sensitivity97 dB
Nominal Diameter457 mm/18 in
Nominal Impedance8 Ohm
Frequency Range30-500 Hz
Chassis TypeCast Aluminum
Magnet TypeFerrite
Magnet Weight2.85 kg/100.6 oz
Voice Coil Diameter99.3 mm/3.9 in
Coil MaterialCCA-R
Former MaterialGlass Fiber
Cone MaterialPaper
Surround MaterialCloth
SuspensionDouble
X-max6.75 mm/0.27 in
Gap Depth13.9 mm/0.54 in
Voice Coil Winding Width25.5 mm/1 in
Packing Dimension505 x 505 x 270 mm
Net Weight15.9 kg/35.1 lb
Shipping Weight16.7kg/35.7 lb

The P.Audio P180/2242v3 is a high output low frequency transducer designed with a vintage voicing. The P180/2242v3 is an upgraded design that features many of P.Audios new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.


The P180/2242v3 employs a large 3.9 inch (99.3mm) diameter voice coil and has been upgraded to an AES rated 1000 watts of continuous power handling and a full 4000 watts of peak rated power handling when sufficient amplifier headroom is available. The P180/2242v3 utilizes P.Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.


The voice coil design is a bobbin wound geometry with P.Audios rectangular wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling.


The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and xtended low frequency response. The double spider design further enhances system mechanical control and reliability.


The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.


Features:
  • 3.9" Large Format Voice Coil
  • 4000 Watts Peak Power Handling
  • Active Balanced Cooling
  • Integrated Demodulation Rings
  • Double Spider Suspension
  • Ferrite Magnetics
  • Precision Rectangular Ribbon Wire Geometry
  • Die Cast Aluminum Chassis
  Re   5.7Ω
  Fs   37 Hz
  Mms   185.81 g/6.55 oz
  Mmd   159.23 g/5.62 oz
  Qms   6.33
  Qes   0.51
  Qts   0.48
  Vas   231.72 lt/8.18 ft3
  SD   1288 cm2
  BI   22 Tm
  Cms   9.5e-05 m/N
  Rms   6.82 Ns/m
  Le (at 1kHz)   0.64 mH
Yes! I am Interested

C15-400B P Audio Speaker

REQUEST CALLBACK

C15-400B P Audio Speaker
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 7,800 / PieceGet Latest Price

Product Details:
Usage/ApplicationDJ System
BrandP Audio
Power400 W
ColorBlack
Model Name/NumberC15-400B
Sensitivity97 dB
Nominal Diameter381 mm/15 in
Nominal Impedance8 Ohm
Frequency Range55-2000 Hz
Chassis TypeCast Aluminum
Magnet TypeFerrite
Magnet Weight2.74 kg/96.6 oz
Voice Coil Diameter75.7 mm/3.0 in
Coil MaterialAL-W
Former MaterialGlass fiber
Cone MaterialPaper
Surround MaterialCloth
SuspensionSingle
X-max3.25 mm/0.13 in
Gap Depth12 mm/0.47 in
Voice Coil Winding Width18.5 mm/0.73 in
Packing Dimension430 x 430 x 230 mm
Net Weight10.1 kg/22.3 lb
Shipping Weight11.3 kg/24.9 lb

C15-400B P Audio Speaker is a high performance wide bandwidth transducer. The C15-400B is an upgraded design that features many of P.Audio’s new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C15-400B has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 55Hz to 2000Hz.


The C15-400B features a large 3 inch (75.7mm) diameter voice coil that provides an AES rated 400 watts of continuous power handling and a full 1600 watts of peak rated power handling when sufficient amplifier headroom is available. The C15-400B utilizes P.Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.


The voice coil design is a bobbin wound geometry with P.Audio’s inside/ outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling.


The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.


Features:
  • 3” Voice Coil
  • 1600 Watts Peak Power Handling
  • Active Balanced Cooling
  • Ferrite Magnetics
  • Precision Inside/Outside coil Geometry
  • Die Cast Aluminum Chassis
SMALL SIGNAL PARAMETERS
  Re   5.4Ω
  Fs   42 Hz
  Mms   102.98 g/3.63 oz
  Mmd   88.60 g/3.13 oz
  Qms   5.09
  Qes   0.61
  Qts   0.55
  Vas   141.96 lt/5.01 ft3
  SD   855 cm2
  BI   15.55 Tm
  Cms   1.4e-04 m/N
  Rms   5.40 Ns/m
  Le (at 1kHz)   0.35 mH
Yes! I am Interested

C15-600EL P Audio Speaker

REQUEST CALLBACK

C15-600EL P Audio Speaker
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 12,000 / PieceGet Latest Price

Product Details:
Usage/ApplicationDJ System
BrandP Audio
Power1200 W (AES)
ColorBlack
Model Name/NumberC15-600EL
Sensitivity96 dB
Size/Dimension430 x 430 x 235 mm
Nominal Diameter381 mm/15 in
Nominal Impedance8 Ohm
Frequency55-2000 Hz
Chassis TypeCast Aluminum
Magnet TypeFerrite
Magnet Weight3.17 kg/111.8 oz
Voice Coil Diameter99.3 mm/4 in
Coil MaterialCCA-R
Former MaterialGlass fiber
Cone MaterialPaper
Surround MaterialCloth
SuspensionDouble
X-max5.25 mm/0.21 in
Gap Depth15 mm/0.59 in
Voice Coil Winding Width25.5 mm/1 in
Net Weight13.2 kg/29.1 lb
Shipping Weight14.2 kg/31.3 lb

C15-600EL P Audio Speaker is a high output wide bandwidth transducer. C15-600EL P Audio Speakeris an upgraded design that features many of P.Audio's new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C15-600EL P Audio Speaker has been optimized for use in two way or three way sound reinforcement systems and has a rated operating range of 55Hz to 2000Hz.

 

The C15-600EL employs a large 3.9 inch (99.3mm) diameter voice coil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available.

 

The C15-600EL utilizes P.Audio's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

 

The voice coil design is a bobbin wound geometry with P.Audio's rectangular wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling.

 

The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response.

 

The C15-600EL also features a double spider configuration that further enhances system reliability and mechanical control.

 

The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

  Re   5.5Ω
  Fs   51 Hz
  Mms   126.83 g/4.47 oz
  Mmd   112.45 g/3.97 oz
  Qms   7.40
  Qes   0.43
  Qts   0.41
  Vas   80.57 lt/2.85 ft3
  SD   855 cm2
  BI   22.66 Tm
  Cms   7.9e-05 m/N
  Rms   5.39 Ns/m
  Le (at 1kHz)   0.67 mH
Yes! I am Interested

GST 18-1500 P Audio Speaker

REQUEST CALLBACK

GST 18-1500 P Audio Speaker
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 22,000 / PieceGet Latest Price

Product Details:
Usage/ApplicationDJ System
ColorBlack
Speaker Channel2.0
Power1500 W (AES)
Sensitivity96 dB
Size/Dimension505 x 505 x 300 mm
BrandP Audio
Model Number/NameGST 18-1500
Nominal diameter457 mm/18 in
Nominal impedance8 Ohm
Frequency range30-1000 Hz
Chassic typeCast Aluminum
Magnet typeFerrite
Magnet weight8.9 kg/312.5 oz
Voice coil diameter127 mm/5 in
Former materialGlass Fiber
Cone materialPaper
X-max9 mm/0.35 in
Gap depth14 mm/0.55 in
Net weight24.8 kg/54.7 lb
Shipping weight26.9 kg/59.3 lb

Details:
  Re   5.6Ω
  Fs   37 Hz
  Mms    285.75 g/10.08 oz
  Mmd    261.09 g/9.21 oz
  Qms    13.15
  Qes    0.52
  Qts    0.50
  Vas   135.51 lt/4.79 ft3
  SD   1225 cm2
  BI    26.87 Tm
  Cms    6.5e-05 m/N
  Rms    5.10 Ns/m
  Le (at 1kHz)    0.72 mH
 
Yes! I am Interested

C12-500MB P Audio Speaker

REQUEST CALLBACK

C12-500MB P Audio Speaker
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 9,200 / PieceGet Latest Price

Product Brochure
Product Details:
Usage/ApplicationDJ System
BrandP Audio
Power500 W
ColorBlack
Model Name/NumberC12-500MB
Sensitivity95 dB
Nominal Diameter305 mm/12 in
Nominal Impedance8 Ohm
Frequency Range60-3000 Hz
Chassis TypeCast Aluminum
Magnet TypeFerrite
Magnet Weight2.9 kg/100.6 oz
Voice Coil Diameter99.3 mm/3.9 in
Coil MaterialCCA-R
Former MaterialGlass Fiber
Cone MaterialPaper
Surround MaterialCloth
SuspensionSingle
X-max4.5 mm/0.18 in
Gap Depth8 mm/0.30 in
Voice Coil Winding Width16.9 mm/0.67 in
Packing Dimension355 x 355 x 180 mm
Net Weight9.7 kg/21.4 lb
Shipping Weight10.5 kg/23.1 lb

The P.Audio C12-500MB is a high performance wide bandwidth transducer. The C12-500MB is an upgraded design that features many of P.Audio’s new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels in the mid band and upper mid frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C12-500MB has been optimized for use in two way or three way sound reinforcement systems. The transducer is also ideal as a mid bass driver for ultra high performance system designs and has an operating bandwidth of 60Hz to 3000Hz.

The C12-500MB features a very large 3.9 inch (99.3mm) diameter voice coil that provides an AES rated 500 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available. The C12-500MB utilizes P.Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

The voice coil design is a bobbin wound geometry with P.Audio’s ribbon rectangular wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling.

The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

Features:
  • 3.9” Large Format Voice Coil
  • 2000 Watts Peak Power Handling
  • Active Balanced Cooling
  • Ferrite Magnetics
  • Precision Rectangular Ribbon Wire Geometry
  • Die Cast Aluminum Chassis
Re   5.8Ω
  Fs   62 Hz
  Mms   75.80 g/2.67 oz
  Mmd   68.35 g/2.41 oz
  Qms   6.66
  Qes   0.42
  Qts   0.40
  Vas   37.95 lt/1.34 ft3
  SD   552 cm2
  BI   20.03 Tm
  Cms   8.9e-05 m/N
  Rms   4.37 Ns/m
  Le (at 1kHz)   0.31 mH
Yes! I am Interested

15BM-300B P Audio Speaker

REQUEST CALLBACK

15BM-300B P Audio Speaker
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 6,500 / PieceGet Latest Price

Product Details:
BrandP Audio
Power300 W
ColorBlack
Model Name/Number15BM-300B
Sensitivity97 dB
Voice Coil Diameter76.2 Mm/3.0 In
Nominal Diameter381 mm/15 In
Nominal Impedance8 Ohm
Frequency Range45-3500 Hz
Chassis TypeCast Aluminum
Magnet TypeFerrite
Magnet Weight2.3 Kg/81.4 Oz
Coil MaterialCCA-W
Former MaterialGlass Fiber
Cone MaterialPaper
Surround MaterialCloth
SuspensionSingle
X-max3.4 mm/0.13 In
Gap Depth10 mm/0.39 In
Voice Coil Winding Width16.8 mm/0.66 In
Dimension430 X 430 X 220 mm
Net Weight8 Kg/17.6 Lb

15BM-300B P Audio Speaker is a high output wide bandwidth transducer. The 15BM-300B NEW is an upgraded design that features many of P.Audio’s new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer has a rated bandwidth of 45Hz to 3500Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The 15BM-300B NEW has been optimized for use in two way or three way sound reinforcement systems.

The 15BM-300B NEW employs a medium format 3 inch (76.2mm) diameter voice coil that provides an AES rated 300 watts of continuous power handling and a full 1200 watts of peak rated power handling when sufficient amplifier headroom is available. The 15BM-300B NEW utilizes P.Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

The voice coil design is a bobbin wound geometry with P.Audio’s precision circular wire technology to insure high conversion efficiency.

The system suspension has been designed specifically for high linear displacement and extended low frequency response. The 15BM-300B NEW also features a single spider configuration that provides system reliability and mechanical control.

The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

Features:
  • 3” Voice Coil
  • 1200 Watts Peak Power Handling
  • Ferrite Magnetics
  • Precision Circular Wire Geometry
  • Die Cast Aluminum Chassis
Re   5.7Ω
  Fs   48 Hz
  Mms   92.19g/3.25 oz
  Mmd   77.81 g/2.74 oz
  Qms   5.39
  Qes   0.43
  Qts   0.40
  Vas   123.35 lt/4.36 ft3
  SD   855 cm2
  BI   19.19 Tm
  Cms   1.2e-04 m/N
  Rms   5.10 Ns/m
  Le (at 1kHz)   0.44 mH
Yes! I am Interested

SRX725 Dual 15 Inch Full Range Professional Speaker

REQUEST CALLBACK

SRX725 Dual 15 Inch Full Range Professional Speaker
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 45,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity2 Piece
Speaker Channel2.0
TypeBluetooth
ColorBlack
Model NumberSRX725
Power1200-4800 W
BrandBlack
Frequency Range37 Hz - 20 kHz
Frequency Response53 Hz - 20 kHz
Coverage Pattern75 x 50 Deg Nominal
Crossover ModesBi-amp / passive, Externally switchable
Crossover Frequency1.2 kHz
System Sensitivity99 dB SPL (passive mode)
Nominal Impedance4-8 Ohm
EnclosureTrapezoidal,15 mm, 11-ply birch plywood
Dimensions1219 mm x 541 mm x 508 mm
Net Weight45 kg (100 lb)
Transport2 x steel handles

Features:

SRX series is high performance, wide bandwidth system in an incredibly compact and efficent package.Extended frequency response is provided by high efficency LF driver teamed with 1"(25mm) exit compression driver mounted on a 75x50 degree constant directivity HF horn.

The SRX series is perfect for higher power applications whereease of installation or speed of deployment are important factors.


Applications: 

Live performance for both indoor and outdoor.

Drum monitor.

Nightclub installations

High-level music palyback.

Reinforcement of music and speech in entertainment or AV applications

High-performance satellite speaker for use with subwoofers

Yes! I am Interested

PA Ceiling Speaker

REQUEST CALLBACK

PA Ceiling Speaker
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1,900 / PieceGet Latest Price

Product Details:
Usage/ApplicationDJ System
Power1W/1m
ColorWhite
Input Power8W RMS
Impedance1.6k/3.3k/6.6k
Frequency Response60-15000 Hz
SPL92 dB
Dimensions200 x 85 mm
Weight0.75 kg

Features:
  • High efficiency
  • Compact design
  • Low maintenance
  • Long working life
  • Excellent finish
  • High in demand
Yes! I am Interested

JBLspeaker 400watt model cslf15400

REQUEST CALLBACK

JBLspeaker 400watt  model cslf15400
  • JBLspeaker 400watt  model cslf15400
  • JBLspeaker 400watt  model cslf15400
  • JBLspeaker 400watt  model cslf15400
  • +6 JBLspeaker 400watt  model cslf15400
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 9,000 / PieceGet Latest Price

Product Brochure
Product Details:
Power400

Yes! I am Interested

 
X


Explore More Products

Contact via E-mail
Contact via SMS
Vicky Jaiswal (Owner)
Panchi Sound
1693/5, seth fakir chand buliding, bhagirath place, chandni chowk
New Delhi - 110006, Delhi, India
Call Us: 
Call Response Rate: 79%
Share Us :



Home  |   Who We Are   |  Our Products  |  Site Map  |   Contact Us

© Panchi Sound. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Panchi Sound