Audio Speaker

Approx. Rs 45,000 / PieceGet Latest Price

Product Details:

Features:

SRX series is high performance, wide bandwidth system in an incredibly compact and efficent package.Extended frequency response is provided by high efficency LF driver teamed with 1"(25mm) exit compression driver mounted on a 75x50 degree constant directivity HF horn.

The SRX series is perfect for higher power applications whereease of installation or speed of deployment are important factors.

Applications: 

Live performance for both indoor and outdoor.

Drum monitor.

Nightclub installations

High-level music palyback.

Reinforcement of music and speech in entertainment or AV applications

High-performance satellite speaker for use with subwoofers

Approx. Rs 17,500 / PieceGet Latest Price

Product Details:

The SD18-1700EL is an very high output low frequency transducer. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating range is 30Hz to 200Hz. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio.

 

The SD18-1700EL employs a large 4.5 inch (114.4mm) diameter voice coil that provides an AES rated 1700 watts of continuous power handling and a full 6800 watts of peak rated power handling when sufficient amplifier headroom is available. It is recommended that the transducer be loaded into a properly designed vented enclosure and suitable active high pass filtering be employed if extremely high power levels are expected at low frequencies. The SD18-1700EL utilizes P.Audio's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

 

The voice coil design is an inside/outside geometry with P.Audios square wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling.

 

System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design insures very high displacement and linear response while maintaining excellent control. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance.

 

The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

 

Features:

• 4.5" Very Large Format Voice Coil
• 6800 Watts Peak Power Handling
• Active Balanced Cooling
• Ferrite Magnetics
• Square wire Inside/Outside Coil Design
• Double Spider Suspension
• Integrated Demodulation Rings
• Die Cast Aluminum Chassis

Specification:

 

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:

P audio C18-1000V2 is a high output low frequency. transducer. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies. and is ideal for high level deep bass and sub-woofer response in both live sound

Approx. Rs 8,000 / PieceGet Latest Price

Product Details:

P Audio 15BM-400BV3 Speaker is a highly upgraded design that features many of P.Audio’s new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer has a rated bandwidth of 40Hz to 3000Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The P Audio 15BM-400BV3 Speaker has been optimized for use in two way or three way sound reinforcement systems.

The P Audio 15BM-400BV3 Speaker employs a medium format 3 inch (76.2mm) diameter voice coil that provides an AES rated 400 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available. The P Audio 15BM-400BV3 Speaker utilizes P.Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

 

The voice coil design is a bobbin wound geometry with P.Audio’s circular wire technology in an inside/outside geometry to insure very high conversion efficiency. The P.Audio circular wire technology and inside/outside winding configuration provides a very large cross-sectional area that substantially improves system cooling and reduces power compression.

 

The system suspension has been designed specifically for high linear displacement and extended low frequency response. The 15BM-500B also features a single spider configuration that provides system reliability and mechanical control.

 

The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

Approx. Rs 6,800 / PieceGet Latest Price

Product Details:

15 BM-350 P Audio Speaker is a high output wide bandwidth transducer. The 15BM-300B(II) NEW is an upgraded design that features many of P.Audio’s new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer has a rated bandwidth of 40Hz to 3000Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The 15BM-300B(II) NEW has been optimized for use in two way or three way sound reinforcement systems.

The 15BM-300B(II) NEW employs a medium format 3 inch (76.2mm) diameter voice coil that provides an AES rated 300 watts of continuous power handling and a full 350 watts of peak rated power handling when sufficient amplifier headroom is available. The 15BM-300B(II) NEW utilizes P.Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

The voice coil design is a bobbin wound geometry with P.Audio’s precision circular wire technology to insure high conversion efficiency.

The system suspension has been designed specifically for high linear displacement and extended low frequency response. The 15BM-300B(II) NEW also features a single spider configuration that provides system reliability and mechanical control.

The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

 

Approx. Rs 9,200 / PieceGet Latest Price

Product Details:

The P.Audio C12-500MB is a high performance wide bandwidth transducer. The C12-500MB is an upgraded design that features many of P.Audio’s new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels in the mid band and upper mid frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C12-500MB has been optimized for use in two way or three way sound reinforcement systems. The transducer is also ideal as a mid bass driver for ultra high performance system designs and has an operating bandwidth of 60Hz to 3000Hz.

The C12-500MB features a very large 3.9 inch (99.3mm) diameter voice coil that provides an AES rated 500 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available. The C12-500MB utilizes P.Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

The voice coil design is a bobbin wound geometry with P.Audio’s ribbon rectangular wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling.

The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

Features:

• 3.9” Large Format Voice Coil
• 2000 Watts Peak Power Handling
• Active Balanced Cooling
• Ferrite Magnetics
• Precision Rectangular Ribbon Wire Geometry
• Die Cast Aluminum Chassis

Approx. Rs 6,500 / PieceGet Latest Price

Product Details:

15BM-300B P Audio Speaker is a high output wide bandwidth transducer. The 15BM-300B NEW is an upgraded design that features many of P.Audio’s new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer has a rated bandwidth of 45Hz to 3500Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The 15BM-300B NEW has been optimized for use in two way or three way sound reinforcement systems.

The 15BM-300B NEW employs a medium format 3 inch (76.2mm) diameter voice coil that provides an AES rated 300 watts of continuous power handling and a full 1200 watts of peak rated power handling when sufficient amplifier headroom is available. The 15BM-300B NEW utilizes P.Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

The voice coil design is a bobbin wound geometry with P.Audio’s precision circular wire technology to insure high conversion efficiency.

The system suspension has been designed specifically for high linear displacement and extended low frequency response. The 15BM-300B NEW also features a single spider configuration that provides system reliability and mechanical control.

The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

Features:

• 3” Voice Coil
• 1200 Watts Peak Power Handling
• Ferrite Magnetics
• Precision Circular Wire Geometry
• Die Cast Aluminum Chassis

Approx. Rs 10,500 / PieceGet Latest Price

Product Details:

15BM-500B P Audio Speaker is a high output wide bandwidth transducer. The 15BM-500B is a highly upgraded design that features many of P.Audio’s new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer has a rated bandwidth of 45Hz to 3500Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The 15BM-500B has been optimized for use in two way or three way sound reinforcement systems.

The 15BM-500B employs a medium format 3.25 inch (82.5mm) diameter voice coil that provides an AES rated 500 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available. The 15BM-500B utilizes P.Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

The voice coil design is a bobbin wound geometry with P.Audio’s circular wire technology in an inside/outside geometry to insure very high conversion efficiency. The P.Audio circular wire technology and inside/outside winding configuration provides a very large cross-sectional area that substantially improves system cooling and reduces power compression.

The system suspension has been designed specifically for high linear displacement and extended low frequency response. The 15BM-500B also features a single spider configuration that provides system reliability and mechanical control.

The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

Features:

• 3.25” Voice Coil
• 2000 Watts Peak Power Handling
• Ferrite Magnetics
• Precision Circular Inside/Outside Wire Geometry
• Die Cast Aluminum Chassis

Approx. Rs 16,500 / PieceGet Latest Price

Product Details:

C18-800EL P Audio Speaker is a high output low frequency transducer. The C18-800EL is an upgraded design that features many of P.Audio's new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.


The C18-800EL employs a large 4 inch (99.3mm) diameter voice coil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The transducer is optimized for use in properly tuned vented enclosures and will provide maximal reliability when both a vented enclosure and active high pass filtering are employed. The C18-800EL utilizes P.Audio's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.


The voice coil design is a bobbin wound geometry with P.Audio's rectangular wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling.


The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design further enhances system mechanical control and reliability. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance.


The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.


Features:

• 5200 Watts Peak Power Handling
• Active Balanced Cooling
• Precision Rectangular Copper Wire
• Single Spider Suspension
• Integrated Demodulation Rings
• High Excursion Half Roll Rubber Surround

Approx. Rs 15,500 / PieceGet Latest Price

Product Details:

C18-650EL P Audio Speaker is a high output low frequency transducer. The C18-650ELv3 is an upgraded design that features many of P.Audios new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.


The C18-650ELv3 employs a large 3.9 inch (99.3mm) diameter voice coil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The transducer is optimized for use in properly tuned vented enclosures and will provide maximal reliability when both a vented enclosure and active high pass filtering are employed. The C18-650ELv3 utilizes P.Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.


The voice coil design is a bobbin wound geometry with P.Audios rectangular wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling.


The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design further enhances system mechanical control and reliability. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance.


The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.


Features:

• 3.9" Large Format Voice Coil
• 4800 Watts Peak Power Handling
• Active Balanced Cooling
• Ferrite Magnetics
• Precision Rectangular Ribbon Wire
• Double Spider Suspension
• Integrated Demodulation Rings
• Die Cast Aluminum Chassis

Approx. Rs 15,500 / PieceGet Latest Price

Product Details:

The P.Audio P180/2242v3 is a high output low frequency transducer designed with a vintage voicing. The P180/2242v3 is an upgraded design that features many of P.Audios new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.


The P180/2242v3 employs a large 3.9 inch (99.3mm) diameter voice coil and has been upgraded to an AES rated 1000 watts of continuous power handling and a full 4000 watts of peak rated power handling when sufficient amplifier headroom is available. The P180/2242v3 utilizes P.Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.


The voice coil design is a bobbin wound geometry with P.Audios rectangular wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling.


The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and xtended low frequency response. The double spider design further enhances system mechanical control and reliability.


The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.


Features:

• 3.9" Large Format Voice Coil
• 4000 Watts Peak Power Handling
• Active Balanced Cooling
• Integrated Demodulation Rings
• Double Spider Suspension
• Ferrite Magnetics
• Precision Rectangular Ribbon Wire Geometry
• Die Cast Aluminum Chassis

Approx. Rs 7,800 / PieceGet Latest Price

Product Details:

C15-400B P Audio Speaker is a high performance wide bandwidth transducer. The C15-400B is an upgraded design that features many of P.Audio’s new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C15-400B has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 55Hz to 2000Hz.


The C15-400B features a large 3 inch (75.7mm) diameter voice coil that provides an AES rated 400 watts of continuous power handling and a full 1600 watts of peak rated power handling when sufficient amplifier headroom is available. The C15-400B utilizes P.Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.


The voice coil design is a bobbin wound geometry with P.Audio’s inside/ outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling.


The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.


Features:

• 3” Voice Coil
• 1600 Watts Peak Power Handling
• Active Balanced Cooling
• Ferrite Magnetics
• Precision Inside/Outside coil Geometry
• Die Cast Aluminum Chassis

SMALL SIGNAL PARAMETERS

Approx. Rs 12,000 / PieceGet Latest Price

Product Details:

C15-600EL P Audio Speaker is a high output wide bandwidth transducer. C15-600EL P Audio Speakeris an upgraded design that features many of P.Audio's new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C15-600EL P Audio Speaker has been optimized for use in two way or three way sound reinforcement systems and has a rated operating range of 55Hz to 2000Hz.

 

The C15-600EL employs a large 3.9 inch (99.3mm) diameter voice coil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available.

 

The C15-600EL utilizes P.Audio's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

 

The voice coil design is a bobbin wound geometry with P.Audio's rectangular wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling.

 

The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response.

 

The C15-600EL also features a double spider configuration that further enhances system reliability and mechanical control.

 

The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

Approx. Rs 22,000 / PieceGet Latest Price

Product Details:

Details:
 

Approx. Rs 1,900 / PieceGet Latest Price

Product Details:

Features:

• High efficiency
• Compact design
• Low maintenance
• Long working life
• Excellent finish
• High in demand

Approx. Rs 9,000 / PieceGet Latest Price

Product Details: